怎么给VMware虚拟机中的CentOS分区扩容-创新互联

这篇文章主要讲解了“怎么给VMware虚拟机中的CentOS分区扩容”，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习“怎么给VMware虚拟机中的CentOS分区扩容”吧！

林芝网站制作公司哪家好，找创新互联！从网页设计、网站建设、微信开发、APP开发、成都响应式网站建设等网站项目制作，到程序开发，运营维护。创新互联自2013年创立以来到现在10年的时间，我们拥有了丰富的建站经验和运维经验，来保证我们的工作的顺利进行。专注于网站建设就选创新互联。

由于开发测试机器dev-vhost017根分区规划不足只有10G,需要扩容。(基于LVM)

先关闭dev-vhost017，然后在vSphere Client 将根分区硬盘10G 调整到50G
怎么给VMware虚拟机中的CentOS分区扩容

开启虚拟机
原始/ 大小 10G

代码如下:

[root@dev-vhost017 ~]# df -h

Filesystem            Size Used Avail Use% Mounted on
/dev/mapper/vg_centos6-lv_root
                      8.3G 4.0G 3.9G 51% /
tmpfs                 939M   12K 939M   1% /dev/shm
/dev/sda1             477M   57M 396M 13% /boot

查看磁盘sda已扩展到50G

代码如下:

[root@dev-vhost017 ~]# fdisk /dev/sda

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
         switch off the mode (command 'c') and change display units to
         sectors (command 'u').

Command (m for help): p

Disk /dev/sda: 53.7 GB, 53687091200 bytes
255 heads, 63 sectors/track, 6527 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0007ef5b

   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1          64      512000   83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              64        1306     9972736   8e Linux LVM

Disk /dev/mapper/vg_centos6-lv_root: 9135 MB, 9135194112 bytes
255 heads, 63 sectors/track, 1110 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/vg_centos6-lv_swap: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

查看lvm状态

代码如下:

[root@dev-vhost017 ~]# pvs

PV VG Fmt Attr PSize PFree
/dev/sda2 vg_centos6 lvm2 a-- 9.51g 0

代码如下:

[root@dev-vhost017 ~]# vgs

VG #PV #LV #SN Attr VSize VFree
vg_centos6 1 2 0 wz--n- 9.51g 0

代码如下:

[root@dev-vhost017 ~]# lvs

LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lv_root vg_centos6 -wi-ao---- 8.51g
lv_swap vg_centos6 -wi-ao---- 1.00g

分区/dev/sda3

代码如下:

[root@dev-vhost017 ~]# fdisk /dev/sda

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
         switch off the mode (command 'c') and change display units to
         sectors (command 'u').

Command (m for help): p

Disk /dev/sda: 53.7 GB, 53687091200 bytes
255 heads, 63 sectors/track, 6527 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0007ef5b

   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1          64      512000   83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              64        1306     9972736   8e Linux LVM
/dev/sda3            1306        6527    41942367+ 83 Linux

代码如下:

[root@dev-vhost017 ~]# partprobe

重启虚拟机格式化/dev/sda3

代码如下:

[root@dev-vhost017 ~]# mkfs.ext4 /dev/sda3

lvm 扩容

代码如下:

[root@dev-vhost017 ~]# pvcreate /dev/sda3

Physical volume "/dev/sda3" successfully created

代码如下:

[root@dev-vhost017 ~]# pvs

PV         VG         Fmt Attr PSize PFree
/dev/sda2 vg_centos6 lvm2 a--   9.51g     0
/dev/sda3             lvm2 --- 40.00g 40.00g

代码如下:

[root@dev-vhost017 ~]# vgextend /dev/mapper/vg_centos6 /dev/sda3 (注意组名)

Volume group "vg_centos6" successfully extended

代码如下:

[root@dev-vhost017 ~]# lvextend -L 39.9G /dev/vg_centos6/lv_root /dev/sda3

Rounding size to boundary between physical extents: 39.90 GiB
Size of logical volume vg_centos6/lv_root changed from 8.51 GiB (2178 extents) to 39.90 GiB (10215 extents).
Logical volume lv_root successfully resized

代码如下:

[root@dev-vhost017 ~]# resize2fs /dev/vg_centos6/lv_root

resize2fs 1.41.12 (17-May-2010)
Filesystem at /dev/vg_centos6/lv_root is mounted on /; on-line resizing required
old desc_blocks = 1, new_desc_blocks = 3
Performing an on-line resize of /dev/vg_centos6/lv_root to 10460160 (4k) blocks.
The filesystem on /dev/vg_centos6/lv_root is now 10460160 blocks long.

代码如下:

[root@dev-vhost017 ~]# pvs

PV VG Fmt Attr PSize PFree
/dev/sda2 vg_centos6 lvm2 a-- 9.51g 0
/dev/sda3 vg_centos6 lvm2 a-- 40.00g 8.60g

代码如下:

[root@dev-vhost017 ~]# vgs

VG #PV #LV #SN Attr VSize VFree
vg_centos6 2 2 0 wz--n- 49.50g 8.60g

代码如下:

[root@dev-vhost017 ~]# lvs

LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lv_root vg_centos6 -wi-ao---- 39.90g
lv_swap vg_centos6 -wi-ao---- 1.00g

代码如下:

[root@dev-vhost017 ~]# df -h

Filesystem            Size Used Avail Use% Mounted on
/dev/mapper/vg_centos6-lv_root
                       40G 4.0G   34G 11% /
tmpfs                 939M   12K 939M   1% /dev/shm
/dev/sda1             477M   57M 396M 13% /boot

感谢各位的阅读，以上就是“怎么给VMware虚拟机中的CentOS分区扩容”的内容了，经过本文的学习后，相信大家对怎么给VMware虚拟机中的CentOS分区扩容这一问题有了更深刻的体会，具体使用情况还需要大家实践验证。这里是创新互联网站建设公司，，小编将为大家推送更多相关知识点的文章，欢迎关注！

新闻名称：怎么给VMware虚拟机中的CentOS分区扩容-创新互联
标题链接：http://scyanting.com/article/deeidp.html

其他资讯