RV1126Linux系统开机启动日志分析（开机异常）-创新互联
DDR Version V1.08 20210825
LPDDR3, 328MHz //ddr类型是LPDDR4X,最高频率2112MHz
//DDR 1个通道每个通道1024MB容量，总共1G容量
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
//ddr支持4个频点变频，分别是528MHz 1068MHz 1560MHz 2112MHz
change to: 328MHz
change to: 528MHz
change to: 784MHz
change to: 924MHz(final freq)
out//DDR 初始化结束
--------------------SPL初始化阶段---------------------
U-Boot SPL board init
U-Boot SPL 2017.09-gc6ee75eec1-210728 #zzz (Sep 13 2021 - 10:36:14)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
//先从SD卡中找启动固件，找不到在继续从EMMC中找启动固件，因为没有接SD卡，所以会有如下错误
Trying to boot from MMC2
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
No misc partition
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
spl: partition error
//从emmc中加载bl31和uboot
Trying to boot from MMC1
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
## Verified-boot: 0
## Checking optee 0x08400000 (gzip @0x08600000) ... sha256(889a0c7a17...) + sha256(bae962097a...) + OK
## Checking uboot 0x00600000 (gzip @0x00800000) ... sha256(d46a50a533...) + sha256(1c14450fd0...) + OK
## Checking fdt 0x006b6ed8 ... sha256(a362d022de...) + OK
Jumping to U-Boot(0x00600000) via OP-TEE(0x08400000)
Total: 412.957 ms//启动到uboot结束一共耗时115.998ms
--------------------BL32初始化阶段---------------------
I/TC:
I/TC: cpu feature:0x0
I/TC: RV1126 SoC
I/TC: cpu_st=0xe0
I/TC: Next entry point address: 0x00600000
I/TC: OP-TEE version: 3.13.0-515-g7b4275734 #zhangzj (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #1 Wed Aug 4 03:30:34 UTC 2021 arm
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
--------------------UBOOT阶段---------------------
U-Boot 2017.09-ga66f8d05e4-dirty #root (Jan 08 2022 - 11:22:51 +0800) //uboot的版本信息
Model: Rockchip RV1126 Evaluation Board
PreSerial: 2, raw, 0xff570000
DRAM: 1021.7 MiB //ddr的总容量
Sysmem: init
Relocation Offset: 00000000
Relocation fdt: 3bbf9cb0 - 3bbfedd8
CR: M/C/I
Using default environment
dwmmc@ffc50000: 0, dwmmc@ffc60000: 1
Bootdev(atags): mmc 0 //从emmc启动，如果是SD卡启动这里显示的是sdmmc
MMC0: HS200, 200Mhz//emmc的速率是200Mhz HS200模式
PartType: EFI
boot mode: None //这是启动模式：指recovery模式或者正常的boot模式，如果是recovery模式的log是[04 28 17:52:10]boot mode: recovery (misc)。 recovery模式指的是烧写后第一次开机，或者烧写了misc后进入格式化模式；boot模式就是正常启动，没有进过recovery。
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 400000Hz
PMIC: RK8090 (on=0x40, off=0x00)
vdd_npu_vepu 800000 uV
vdd_arm 800000 uV
DDR Version V1.08 20210825
LPDDR3, 328MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
change to: 328MHz
change to: 528MHz
change to: 784MHz
change to: 924MHz(final freq)
out
U-Boot SPL board init
U-Boot SPL 2017.09-gc6ee75eec1-210728 #zzz (Sep 13 2021 - 10:36:14)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
//先从SD卡中找启动固件，找不到在继续从EMMC中找启动固件，因为没有接SD卡，所以会有如下错误
Trying to boot from MMC2
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
No misc partition
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
spl: partition error
//从emmc中加载bl31和uboot
Trying to boot from MMC1
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
## Verified-boot: 0
## Checking optee 0x08400000 (gzip @0x08600000) ... sha256(889a0c7a17...) + sha256(bae962097a...) + OK
## Checking uboot 0x00600000 (gzip @0x00800000) ... sha256(d46a50a533...) + sha256(1c14450fd0...) + OK
## Checking fdt 0x006b6ed8 ... sha256(a362d022de...) + OK
Jumping to U-Boot(0x00600000) via OP-TEE(0x08400000)
Total: 147.923 ms //启动到uboot结束一共耗时115.998ms
--------------------BL32初始化阶段---------------------
I/TC:
I/TC: cpu feature:0x0
I/TC: RV1126 SoC
I/TC: cpu_st=0xe0
I/TC: Next entry point address: 0x00600000
I/TC: OP-TEE version: 3.13.0-515-g7b4275734 #zhangzj (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #1 Wed Aug 4 03:30:34 UTC 2021 arm
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
--------------------UBOOT阶段---------------------
U-Boot 2017.09-ga66f8d05e4-dirty #root (Jan 08 2022 - 11:22:51 +0800)
Model: Rockchip RV1126 Evaluation Board
PreSerial: 2, raw, 0xff570000
DRAM: 1021.7 MiB//ddr的总容量
Sysmem: init
Relocation Offset: 00000000
Relocation fdt: 3bbf9cb0 - 3bbfedd8
CR: M/C/I
Using default environment
dwmmc@ffc50000: 0, dwmmc@ffc60000: 1
Bootdev(atags): mmc 0//从emmc启动，如果是SD卡启动这里显示的是sdmmc
MMC0: HS200, 200Mhz //emmc的速率是200Mhz HS200模式
PartType: EFI
boot mode: None
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 400000Hz
PMIC: RK8090 (on=0x40, off=0x00)
vdd_npu_vepu 800000 uV
vdd_arm 800000 uV
DDR Version V1.08 20210825
LPDDR3, 328MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
change to: 328MHz
change to: 528MHz
change to: 784MHz
change to: 924MHz(final freq)
out
U-Boot SPL board init
U-Boot SPL 2017.09-gc6ee75eec1-210728 #zzz (Sep 13 2021 - 10:36:14)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
//先从SD卡中找启动固件，找不到在继续从EMMC中找启动固件，因为没有接SD卡，所以会有如下错误
Trying to boot from MMC2
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
No misc partition
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
spl: partition error
Trying to boot from MMC1
SPL: A/B-slot: _a, successful: 0, tries-remain: 7
## Verified-boot: 0
## Checking optee 0x08400000 (gzip @0x08600000) ... sha256(889a0c7a17...) + sha256(bae962097a...) + OK
## Checking uboot 0x00600000 (gzip @0x00800000) ... sha256(d46a50a533...) + sha256(1c14450fd0...) + OK
## Checking fdt 0x006b6ed8 ... sha256(a362d022de...) + OK
Jumping to U-Boot(0x00600000) via OP-TEE(0x08400000)
Total: 148.313 ms
I/TC:
I/TC: cpu feature:0x0
I/TC: RV1126 SoC
I/TC: cpu_st=0xe0
I/TC: Next entry point address: 0x00600000
I/TC: OP-TEE version: 3.13.0-515-g7b4275734 #zhangzj (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05)) #1 Wed Aug 4 03:30:34 UTC 2021 arm
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
U-Boot 2017.09-ga66f8d05e4-dirty #root (Jan 08 2022 - 11:22:51 +0800)
Model: Rockchip RV1126 Evaluation Board
PreSerial: 2, raw, 0xff570000
DRAM: 1021.7 MiB
Sysmem: init
Relocation Offset: 00000000
Relocation fdt: 3bbf9cb0 - 3bbfedd8
CR: M/C/I
Using default environment
dwmmc@ffc50000: 0, dwmmc@ffc60000: 1
Bootdev(atags): mmc 0 //从emmc启动，如果是SD卡启动这里显示的是sdmmc
MMC0: HS200, 200Mhz //emmc的速率是200Mhz HS200模式
PartType: EFI
boot mode: None
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
I2c0 speed: 400000Hz
PMIC: RK8090 (on=0x40, off=0x00)
vdd_npu_vepu 800000 uV
vdd_arm 800000 uV
U-Boot SPLi o-bdooamraidn i:n OitK
Can't get crtc id, default set to id = 0
Could not find baseparameter partition
Model: Rockchip RV1109 EVB DDR3 V13 Facial Gate Board //这里显示的是dts的名称，可以根据这个确认固件是否烧对
U-Boot SPL 2017.09-gc6ee75eec1-210728 #zzz (Sep 13 2021 - 10:36:14)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
//先从SD卡中找启动固件，找不到在继续从EMMC中找启动固件，因为没有接SD卡，所以会有如下错误
Trying to boot from MMC2
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
No misc partition
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0xX != 0xX
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
spl: partition error
//从emmc中加载bl31和uboot
Trying to boot from MMC1
Rockchip UBOOT DRM driver version: v1.0.1
//显示dsi部分初始化，参数配置是kernel的dts中的参数
Using display timing dts
dsi@ffb30000: detailed mode clock 64000 kHz, flags[a]
H: 0800 0852 0860 0908
V: 1280 1296 1302 1317
bus_format: 100e
final DSI-Link bandwidth: 426 Mbps x 4
## Verified-boot: 1
Verified-boot requires CONFIG_SPL_FIT_SIGNATURE enabled
### ERROR ### Please RESET the board ###
# Reset the board to bootrom #
你是否还在寻找稳定的海外服务器提供商？创新互联www.cdcxhl.cn海外机房具备T级流量清洗系统配攻击溯源，准确流量调度确保服务器高可用性，企业级服务器适合批量采购，新人活动首月15元起，快前往官网查看详情吧
网页标题：RV1126Linux系统开机启动日志分析（开机异常）-创新互联
文章链接：http://scyanting.com/article/djhjjh.html
