四川盐亭网站制作公司

LVS+keepalived+httpd高可用集群

环境：
主keepalived服务器：192.168.80.100
从keepalived服务器:   192.168.80.101

Web服务器:192.168.80.102
                    192.168.80.103
在80.100虚拟机上：
systemctl stop firewalld           //关闭防火墙
setenforce 0                            //关闭监控
yum install lrz* -y       //安装上传软件
把keepalived包拉入

LVS+keepalived+httpd高可用集群

蒙自ssl适用于网站、小程序/APP、API接口等需要进行数据传输应用场景，ssl证书未来市场广阔！成为创新互联的ssl证书销售渠道，可以享受市场价格4-6折优惠！如果有意向欢迎电话联系或者加微信：18982081108（备注：SSL证书合作）期待与您的合作！

tar xf keepalived-1.4.2.tar.gz -C /opt/       //解压keepalived-1.4.2文件到/opt
cd /opt/keepalived-1.4.2/
yum install gcc gcc-c++ make popt-devel kernel-devel openssl-devel -y
./configure --prefix=/
make && make install
cd /
cd /etc/
ls | grep keepalived
cd keepalived/

LVS+keepalived+httpd高可用集群

vi keepalived.conf                          //进入keepalived删除所有内容并添加以下内容：

! Configuration File for keepalived
global_defs {
   router_id LVS_01            //本服务器的名称
}
vrrp_instance VI_1 {            //定义VRRP热备实例
    state MASTER             //热备状态，MASTER表示主服务器，BACKUP表示从服务器
    interface ens32            //承载VIP地址的物理接口
    virtual_router_id 51        //虚拟路由器的ID号，每个热备组保持一致
    priority 110               //优先级，数值越大优先级越高
    advert_int 1               //通告间隔秒数（心跳频率）
    authentication {            //热备认证信息，每个热备组保持一致
        auth_type PASS        //认证类型
        auth_pass 6666        //密码字符串
    }
    virtual_ipaddress {          //指定漂移地址（VIP），可以有多个
        192.168.80.188
    }
}
virtual_server 192.168.80.188 80 {      //虚拟服务器地址（VIP）、端口
        delay_loop 6               //健康检查的间隔时间（秒）
        lb_algo rr                  //轮询（rr）调度算法
        lb_kind DR                 //直接路由（DR）群集工作模式
        persistence_timeout 60       //连接保持时间（秒）
        protocol TCP                //应用服务器采用的是TCP协议
real_server 192.168.80.102 80 {         //第一个Web服务器节点的地址、端口
        weight 1                   //节点的权重
        TCP_CHECK {                //健康检查方式
        connect_port 80             //检查的目标端口
        connect_timeout 3           //连接超时（秒）
        nb_get_retry 3              //连接超时（秒）
        delay_before_retry 3          //重试间隔
        }
}
real_server 192.168.80.103 80 {           //第二个Web服务器节点的地址、端口
        weight 1                                     //节点的权重
        TCP_CHECK {                            //健康检查方式
             connect_port 80                    //检查的目标端口
             connect_timeout 3                 //连接超时（秒）
             nb_get_retry 3                       //连接超时（秒）
             delay_before_retry 3               //重试间隔
     }
  }
}

   :wq        //保存退出
service keepalived start
systemctl status keepalived      //查看keepalived状态

LVS+keepalived+httpd高可用集群

ip addr show dev ens32
LVS+keepalived+httpd高可用集群

modprobe ip_vs
yum install ipvsadm -y
service keepalived restart
ipvsadm -Ln            //查看LVS虚拟服务器

LVS+keepalived+httpd高可用集群

在80.101虚拟机上：
systemctl stop firewalld           //关闭防火墙
setenforce 0                            //关闭监控
yum install lrz* -y       //安装上传软件
把keepalived包拉入

LVS+keepalived+httpd高可用集群

tar xf keepalived-1.4.2.tar.gz -C /opt/       //解压keepalived-1.4.2文件到/opt
cd /opt/keepalived-1.4.2/
yum install gcc gcc-c++ make popt-devel kernel-devel openssl-devel -y
./configure --prefix=/
make && make install
modprobe ip_vs
yum install ipvsadm -y
vi /etc/keepalived/keepalived.conf            //删除所有内容并添加以下内容：

! Configuration File for keepalived
global_defs {
   router_id LVS_02
}
vrrp_instance VI_1 {
    state BACKUP
    interface ens32
    virtual_router_id 51
    priority 105
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 6666
    }
    virtual_ipaddress {
        192.168.80.188
    }
}
virtual_server 192.168.80.188 80 {
        delay_loop 6
        lb_algo rr
        lb_kind DR
        persistence_timeout 60
        protocol TCP
real_server 192.168.80.102 80 {
        weight 1
        TCP_CHECK {
        connect_port 80
        connect_timeout 3
        nb_get_retry 3
        delay_before_retry 3
        }
}
real_server 192.168.80.103 80 {
        weight 1
        TCP_CHECK {
             connect_port 80
             connect_timeout 3
             nb_get_retry 3
             delay_before_retry 3
     }
  }
}

   ：wq       //保存退出
service keepalived start
systemctl status keepalived           //查看keepalived状态

LVS+keepalived+httpd高可用集群

————————————————————————————

在80.102虚拟机上：
systemctl stop firewalld
setenforce 0
yum install httpd -y                  //安装httpd    
vi /etc/httpd/conf/httpd.conf
ServerName   www.example.com.80  前面的#去掉

LVS+keepalived+httpd高可用集群

cd /var/www/html/              //进入目录
echo "
SERVER AA
" > index.html       //在index.html添加内容
ls
cat index.html

LVS+keepalived+httpd高可用集群

systemctl start httpd
cd
ls
./web.sh

LVS+keepalived+httpd高可用集群

ifconfig //查找IP地址
LVS+keepalived+httpd高可用集群

在虚拟机80.103上：
systemctl stop firewalld
setenforce 0

yum install httpd -y //安装httpd

vi /etc/httpd/conf/httpd.conf
ServerName   www.example.com.80 前面的#去掉

LVS+keepalived+httpd高可用集群

cd /var/www/html/            //进入目录
echo "
SERVER BB
" > index.html       //在index.html添加内容
ls
cat index.html

LVS+keepalived+httpd高可用集群

systemctl start httpd
vi web.sh      
里面添加以下内容
#!/bin/bash
#haha
ifconfig lo:0 192.168.80.188 broadcast 192.168.80.188 netmask 255.255.255.255 up
route add -host 192.168.80.188 dev lo:0
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p &>/dev/null

    :wq       //保存退出
chmod +x web.sh      //设置权限
./web.sh
ifconfig          //查找IP地址

LVS+keepalived+httpd高可用集群

scp web.sh root@192.168.80.102:/root/     //把地址传送过去
yes
root密码

LVS+keepalived+httpd高可用集群

网页上输入http:192.168.80.188

LVS+keepalived+httpd高可用集群

在80.103中
systemctl stop httpd      //关闭httpd
在页面上刷新成下面情况：

LVS+keepalived+httpd高可用集群


网站栏目：LVS+keepalived+httpd高可用集群
URL地址：http://scyanting.com/article/ggpjep.html

其他资讯