SRXJunos系统安装更新之一(U盘安装)
Follow these steps to install the software via the CLI from a USB stick:
创新互联成立于2013年,先为伊通等服务建站,伊通等地企业,进行企业商务咨询服务。为伊通企业网站制作PC+手机+微官网三网同步一站式服务解决您的所有建站问题。
Download the Junos upgrade file to the USB stick.
Locate the USB device ID that Junos is associating to the USB stick:
user@srx> start shell
user@srx% ls /dev/Insert the USB device into the USB slot. For example, slot 0 would return the following:
root# umass0: USB USBFlashDrive, rev 2.00/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0:Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 980MB (2007040 512 byte sectors: 64H 32S/T 980C)
Run the following command
user@srx% ls /dev/
Locate difference in outputs to locate drive label. (It will usually be da#s1, i.e. da0s1)Create a mount directory:
user@srx% mkdir /tmp/usb
Mount the USB to the directory:
user@srx% mount -t msdosfs /dev/
/tmp/usb
Example:user@srx% mount -t msdosfs /dev/da0s1 /tmp/usb
(there is a space between the label name and /tmp)
Verify that the USB is mounted to the device:root@% pwd
/cf/root
root@% cd /tmp/usb/
root@% pwd
/cf/tmp/usb
root@% ls
junos-jsr-11.4R5.7-export.tgzExit shell and install the software:
user@srx% exit
user@srx> request system software add /tmp/usb/no-validate no-copy For additional details regarding a software installation, refer to the instructions at Installing the Software.
Upon completion, reboot the SRX:
user@srx> request system reboot
分享题目:SRXJunos系统安装更新之一(U盘安装)
浏览路径:http://scyanting.com/article/igchpe.html