SQLProfile（第二篇）

通过SQL Tuning Advisor使用SQL profile

在11GR2上SQL Tuning Advisor已经变得非常好用，我非常喜欢将一些非常复杂的SQL语句交给SQL Tuning Advisor来调优，几乎每次都不让我失望，通常调优结束后，SQL Tuning Advisor都会给你一些建议，例如建议你创建索引或者收集统计信息，或者建议你接受SQL Profile并且给出了接受SQL Profile后性能将得到的提升。本节将会给出一个示例来演示如何通过SQL Tuning Advisor来使用SQL Profile。首先我们需要构建一下需要用到的测试表：

10年积累的成都网站设计、成都网站制作经验，可以快速应对客户对网站的新想法和需求。提供各种问题对应的解决方案。让选择我们的客户得到更好、更有力的网络服务。我虽然不认识你，你也不认识我。但先网站制作后付款的网站建设流程，更有仁和免费网站建设让你可以放心的选择与我们合作。

SQL>CREATE TABLE test

2 AS

3 SELECT ROWNUM id,

4 DBMS_RANDOM.STRING('A', 12) name,

5 DECODE(MOD(ROWNUM, 500), 0, 'Inactive', 'Active') status

6 FROM all_objects a,dba_objects b

7 WHERE ROWNUM <= 50000;

Table created.

SQL>create index t_ind on t(status);

Index created.

SQL>begin

2 dbms_stats.gather_table_stats(ownname =>'test',

3 tabname => 'test',

4 no_invalidate => FALSE,

5 estimate_percent => 100,

6 force => true,

7 degree => 5,

8 method_opt => 'for all columns size 1',

9 cascade => true);

10 end;

11 /

SQL>select status,count(*) from test group by status;

STATUS COUNT(*)

---------------- ----------

Active 49900

Inactive 100

上面的代码做了下面几件事：

l 创建了一张测试表test,总记录数50000。

l 表上的字段status一共有2个唯一值：Active和Inactive，此字段有数据倾斜。

l 列status上值为Active的值有49900个，占了表里绝大多数的记录，为Inactive的记录非常少，只有100个。

l status字段上有索引，分析了表的统计信息，但是status字段没有收集直方图。

我们来对status为Inactive的值做查询，由于status为Inactive的值非常少，因此走索引扫描性能更好，但是由于列上缺少直方图，因此执行计划会走全表扫描：

SQL>select count(name) from test where status='Inactive';

COUNT(NAME)

-----------

100

SQL>select * from table(dbms_xplan.display_cursor);

PLAN_TABLE_OUTPUT

------------------------------------------------------------------------------

SQL_ID c37q7z5qjnwwf, child number 0

-------------------------------------

select count(name) from test where status='Inactive'

Plan hash value: 1950795681

---------------------------------------------------------------------------

---------------------------------------------------------------------------

| 0 | SELECT STATEMENT | | | | 51 (100)| |

| 1 | SORT AGGREGATE | | 1 | 21 | | |

|* 2 | TABLE ACCESS FULL| TEST | 25000 | 512K| 51 (2)| 00:00:01 |

---------------------------------------------------------------------------

上面执行计划里显示的经过谓词过滤后的全表扫描返回的基数为25000，因为缺少直方图，因此优化器就简单的通过基数=表的总记录数/status字段的唯一值数量=50000/2=25000来得出基数。我们来通过SQL Tuning Advisor分析一下这个SQL，看看优化器能不能识别到这是一个低效的执行计划，能否给出我们一些建议：

SQL>var c varchar2(100)

SQL>exec :c := dbms_sqltune.CREATE_TUNING_TASK(SQL_ID=>'c37q7z5qjnwwf')

PL/SQL procedure successfully completed.

SQL>exec dbms_sqltune.execute_tuning_task(task_name => :c)

PL/SQL procedure successfully completed.

SQL>select dbms_sqltune.report_tuning_task(:c) from dual;

DBMS_SQLTUNE.REPORT_TUNING_TASK(:C)

-------------------------------------------------------------------------------

GENERAL INFORMATION SECTION

-------------------------------------------------------------------------------

Tuning Task Name : TASK_1112

Tuning Task Owner : TEST

Workload Type : Single SQL Statement

Scope : COMPREHENSIVE

Time Limit(seconds): 1800

Completion Status : COMPLETED

Started at : 08/01/2014 15:59:32

Completed at : 08/01/2014 15:59:33

-------------------------------------------------------------------------------

Schema Name: TEST

SQL ID : c37q7z5qjnwwf

SQL Text : select count(name) from test where status='Inactive'

-------------------------------------------------------------------------------

FINDINGS SECTION (1 finding)

-------------------------------------------------------------------------------

1- SQL Profile Finding (see explain plans section below)

--------------------------------------------------------

A potentially better execution plan was found for this statement.

Recommendation (estimated benefit: 51.46%)

------------------------------------------

- Consider accepting the recommended SQL Profile.

execute dbms_sqltune.accept_sql_profile(task_name => 'TASK_1112',

task_owner => 'TEST', replace => TRUE);

Validation results

------------------

The SQL Profile was tested by executing both its plan and the original plan

and measuring their respective execution statistics. A plan may have been

only partially executed if the other could be run to completion in less time.

Original Plan With SQL Profile % Improved

------------- ---------------- ----------

Completion Status: COMPLETE COMPLETE

Elapsed Time (s): .00212 .000221 89.57 %

CPU Time (s): .002099 .0002 90.47 %

User I/O Time (s): 0 0

Buffer Gets: 210 102 51.42 %

Physical Read Requests: 0 0

Physical Write Requests: 0 0

Physical Read Bytes: 0 0

Physical Write Bytes: 0 0

Rows Processed: 1 1

Fetches: 1 1

Executions: 1 1

Notes

-----

1. Statistics for the original plan were averaged over 10 executions.

2. Statistics for the SQL Profile plan were averaged over 10 executions.

-------------------------------------------------------------------------------

EXPLAIN PLANS SECTION

-------------------------------------------------------------------------------

1- Original With Adjusted Cost

------------------------------

Plan hash value: 1950795681

---------------------------------------------------------------------------

---------------------------------------------------------------------------

| 0 | SELECT STATEMENT | | 1 | 21 | 51 (2)| 00:00:01 |

| 1 | SORT AGGREGATE | | 1 | 21 | | |

|* 2 | TABLE ACCESS FULL| TEST | 100 | 2100 | 51 (2)| 00:00:01 |

---------------------------------------------------------------------------

2- Using SQL Profile

--------------------

Plan hash value: 4130896540

--------------------------------------------------------------------------------------

--------------------------------------------------------------------------------------

| 0 | SELECT STATEMENT | | 1 | 21 | 2 (0)| 00:00:01 |

| 1 | SORT AGGREGATE | | 1 | 21 | | |

| 2 | TABLE ACCESS BY INDEX ROWID| TEST | 100 | 2100 | 2 (0)| 00:00:01 |

|* 3 | INDEX RANGE SCAN | T_IND | 100 | | 1 (0)| 00:00:01 |

--------------------------------------------------------------------------------------

Dbms_sqltune包被用来创建调优任务、执行调优任务、查看调优结果，通过dbms_sqltune包的CREATE_TUNING_TASK函数来为SQL_ID为c37q7z5qjnwwf的SQL创建了一个调优任务。然后通过execute_tuning_task过程来执行这个调优任务，任务运行后，优化器会利用动态采样等技术去验证评估内容与实际内容的差异，并且根据差异去调整执行计划。最后通过report_tuning_task来产生report查看调优的结果。调优结果里为我们提供了一个建议，建议我们采用一个SQL Profile，并且比对了采用SQL Profile后的性能提升，report的后面EXPLAIN PLANS SECTION部分展示了采用SQL Profile后，执行计划变为了索引扫描，而且基数的评估非常准确，从25000已经变为了100。

n Note：当你运行SQLTuning Advisor后，建议你接受一个SQL Profile，如果你想在接受SQL Profile前知道它到底为你提供了些什么，可以运行以下查询获得：

sys@DLSP>select

2 -- b.ATTR1 -- 10g 列

3 b.ATTR5 -- 11g 列

4 from

5 wri$_adv_tasks a,

6 wri$_adv_rationale b

7 where

8 a.name = 'TASK_1112'

9 and b.task_id = a.id

10 order by

11 b.rec_id, b.id

12 ;

ATTR5

---------------------------------------------------------------------------

OPT_ESTIMATE(@"SEL$1", TABLE, "TEST"@"SEL$1", SCALE_ROWS=0.004)

OPT_ESTIMATE(@"SEL$1", INDEX_SCAN, "TEST"@"SEL$1", "T_IND", SCALE_ROWS=0.004)

OPTIMIZER_FEATURES_ENABLE(default)

wri$_adv_tasks的name字段为任务名，在我们上面的例子里，可以通过print c在SQLPLUS环境下获得任务名，也可以在dbms_sqltune.report_tuning_task(:c)的输出里找到任务名。

我们接受这个SQL Profile来看看再次查询是否能用到刚创建的SQL Profile：

SQL>execute dbms_sqltune.accept_sql_profile(task_name => 'TASK_1112',-

> task_owner => 'TEST', replace => TRUE);

PL/SQL procedure successfully completed.

SQL>select count(name) from test where status='Inactive';

COUNT(NAME)

-----------

100

SQL>select * from table(dbms_xplan.display_cursor);

PLAN_TABLE_OUTPUT

------------------------------------------------------------------------------

SQL_ID c37q7z5qjnwwf, child number 0

-------------------------------------

select count(name) from test where status='Inactive'

Plan hash value: 4130896540

--------------------------------------------------------------------------------------

--------------------------------------------------------------------------------------

| 0 | SELECT STATEMENT | | | | 2 (100)| |

| 1 | SORT AGGREGATE | | 1 | 21 | | |

| 2 | TABLE ACCESS BY INDEX ROWID| TEST | 100 | 2100 | 2 (0)| 00:00:01 |

|* 3 | INDEX RANGE SCAN | T_IND | 100 | | 1 (0)| 00:00:01 |

--------------------------------------------------------------------------------------

Note

-----

- SQL Profile SYS_SQLPROF_01479094feeb0003 used for this statement

接受SQL Tuning Advisor提供的SQL Profile后，执行计划Note部分：- SQL Profile SYS_SQLPROF_01479094feeb0003 used for this statement，显示已经使用到了SQL Profile，注意由SQL Tuning Advisor产生的SQL Profile名称都是SYS_SQLPROF作为前缀，使用到SQL Profile后执行计划也已经从全表扫描变为了索引扫描。dbms_sqltune的accept_sql_profile过程有多个参数可用，task_name、task_owner指创建SQL调优任务的任务名和所属用户，参数name和DESCRIPTION指SQL Profile的名字和对SQL Profile的描述，参数CATEGORY来指定创建的SQL Profile所属的类，默认的类为default。参数replace代表是否取代已有的SQL Profile，由于一个SQL只能有一个SQL Profile，不像Baseline，一个SQL可用有多个Baseline，因此如果一个SQL已经存在了SQL Profile，那么重新创建时，必须指定replace参数，设置为true，参数force_match指明了文本标准化的方式，默认为false。一旦接受SQL Profile，就可以通过视图dba_sql_profiles视图来查看SQL Profile的相关信息。因为SQL Profile并不属于某个用户，因此all_sql_profiles和user_sql_profiles视图都不可用。

如果一个SQL使用了SQL Profile，那么这个SQL的v$sql的sql_profile字段会显示使用到的SQL Profile的名字。下面的查询显示了系统中存在的SQL Profile和当前共享池中正在使用的SQL Profile的SQL。

SQL>select name, category, status, substr(sql_text,1,25) sql_text, force_matching

2 from dba_sql_profiles

3 where sql_text like nvl('&sql_text','%')

4 and name like nvl('&name',name)

5 order by last_modified

6 ;

Enter value for sql_text:

Enter value for name:

NAME CATEGORY STATUS SQL_TEXT FORCE_

------------------------------ --------- -------- ------------------------- ------

profile_c99yw1xkb4f1u_dwrose DEFAULT ENABLED select * from test NO

profile_bhm28h6575bjy_dwrose DEFAULT ENABLED select test2.object_name, NO

profile_51k1ug4rwah3c_dwrose DEFAULT ENABLED select distinct substr(ma NO

profile_cm6stbx539mcz_dwrose DEFAULT ENABLED select count(*) from tt NO

profile_c37q7z5qjnwwf_dwrose DEFAULT ENABLED select count(name) from t NO

SQL>select sql_id,

2 child_number cn,

3 plan_hash_value plan_hash,

4 sql_profile,

5 executions execs,

6 buffer_gets / decode(nvl(executions, 0), 0, 1, executions) avg_lio

7 from v$sql s

8 where upper(sql_text) like upper(nvl('&sql_text', sql_text))

9 and sql_text not like '%from v$sql where sql_text like nvl(%'

10 and sql_id like nvl('&sql_id', sql_id)

11 and sql_profile is not null

12 order by 1, 2, 3 ;

Enter value for sql_text:

SQL_ID CN PLAN_HASH SQL_PROFILE EXECS AVG_LIO

-------------- --- ---------- ------------------------------ ----- ----------

c37q7z5qjnwwf 0 4130896540 profile_c37q7z5qjnwwf_dwrose 1 108

c37q7z5qjnwwf 1 4130896540 profile_c37q7z5qjnwwf_dwrose 2 105

我们根据SQL_PROFILE的命名知道，这些SQL Profile都不是SQL Tuning Advisor创建的，是我们手工创建的，因为SQL Tuning Advisor创建的SQL Profile都是以SYS_SQLPROF作为前缀的。

标题名称：SQLProfile（第二篇）
文章分享：http://scyanting.com/article/ijocei.html

SQLProfile（第二篇）

通过SQL Tuning Advisor使用SQL profile

其他资讯