搭建LVS的DR模式和配置keepalived+LVS-创新互联

这篇文章给大家分享的是搭建LVS的DR模式和配置keepalived+LVS的方法。小编觉得挺实用的,因此分享给大家学习。如下资料是关于keepalived和lvs-DR的内容。

成都创新互联公司主要从事网页设计、PC网站建设(电脑版网站建设)、wap网站建设(手机版网站建设)、成都响应式网站建设、程序开发、网站优化、微网站、重庆小程序开发等,凭借多年来在互联网的打拼,我们在互联网网站建设行业积累了丰富的成都网站制作、成都网站建设、网站设计、网络营销经验,集策划、开发、设计、营销、管理等多方位专业化运作于一体。

什么是Keepalived

keepalived采用VRRP热备份协议实现Linux服务器的多机热备功能
VRRP,虚拟路由冗杂协议,是针对路由器的一种备份解决方案

keepalived可以实现多机热备,每个热备组可有多台服务器,最常用的就是双机热备
双击热备的故障切换是由虚拟IP地址的飘逸来实现,适用于各种应用服务器

LVS-DR的ARP问题

在LVS-DR的负载均衡群集中,负载均衡器与节点服务器都要配置相同的VIP地址
在局域网中具有相同的IP地址,势必会造成服务器APR通信的紊乱
当一个ARP广播发送到LVS-DR集群时,因为负载均衡器和节点服务器都是连接到相同的网络上,它们都会接收到ARP广播
此时只有前端的负载均衡器进行响应。其他节点服务器不应该响应ARP广播

LVS-DR的ARP问题解决方案

对节点服务器进行处理,使其不响应针对VIP的ARP请求
使用虚接口lo:0承载VIP地址
设置内核参数arp_ignore=1:系统只响应目的IP为本地IP的ARP请求

下面我们来做实验

实验规划

我们需要五台虚拟机
DR1  主服务器 192.168.100.201
DR4  备份服务器 192.168.100.202
web 5  192.168.100.221
web 7  192.168.100.222
vip     192.168.100.10
clent   192.168.100.50

把需要的LVS模块,keepalived,http分别装好

#1,4
[root@localhost ~]# yum install ipvsadm keepalived -y
#5,7
[root@localhost ~]# yum install httpd -y

第一台主负载均衡调度器选择仅主机模式,配置网卡

搭建LVS的DR模式和配置keepalived+LVS

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33 
BOOTPROTO=static #静态
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes

IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=849aa04e-1874-490f-8cb0-b2fde4b9a6f8
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.100.201 #地址
NETMASK=255.255.255.0 #子网 掩码
GATEWAY=192.168.100.1 #网关
[root@localhost ~]# systemctl restart network #ch重启网络服务
[root@localhost ~]# ifconfig #查看固定地址是否生效

第二台4备份负载均衡调度器,绑定仅主机模式,配置网卡

搭建LVS的DR模式和配置keepalived+LVS

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33 

BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=c3f0a196-6819-4702-9b54-7cad18402591
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.100.202
NETMASK=255.255.255.0
GATEWAY=192.168.100.1
[root@localhost ~]# systemctl restart network
[root@localhost ~]# ifconfig

第三台5web服务器绑定仅主机模式,配置网卡

搭建LVS的DR模式和配置keepalived+LVS

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33 

BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=a6cf69fe-eb42-4a99-9239-0da4cdeae0c7
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.100.221
NETMASK=255.255.255.0
GATEWAY=192.168.100.1
[root@localhost ~]# systemctl restart network
[root@localhost ~]# ifconfig

第四台7web服务器绑定仅主机模式,配置网卡

搭建LVS的DR模式和配置keepalived+LVS

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33 
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=447e510f-fea3-4b6c-8f47-d0c6319ead28
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.100.222
NETMASK=255.255.255.0
GATEWAY=192.168.100.1
[root@localhost ~]# systemctl restart network
[root@localhost ~]# ifconfig

配置第一台1主服务器

[root@localhost ~]# vim /etc/sysctl.conf
net.ipv4.ip_forward=1
#proc响应关闭重定向功能
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0
[root@localhost ~]# sysctl -p #生效
net.ipv4.ip_forward = 1
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0

创建虚拟网卡

[root@localhost ~]# cd /etc/sysconfig/network-scripts/

[root@localhost network-scripts]# cp -p ifcfg-ens33 ifcfg-ens33:0
[root@localhost network-scripts]# vim ifcfg-ens33:0
100dd

DEVICE=ens33:0
ONBOOT=yes
IPADDR=192.168.100.10
NETMASK=255.255.255.0

[root@localhost network-scripts]# ifup ens33:0 #开启网卡,这个网关是用来做虚拟IP的,相当于一给访问入口

[root@localhost network-scripts]# ifconfig
[root@localhost network-scripts]# cd /etc/init.d/
[root@localhost init.d]# vim dr.sh
#!/bin/bash
GW=192.168.100.1
VIP=192.168.100.10
RIP1=192.168.100.221
RIP2=192.168.100.222
case "$1" in
start)
     /sbin/ipvsadm --save > /etc/sysconfig/ipvsadm
     systemctl start ipvsadm
     /sbin/ifconfig ens33:0 $VIP broadcast $VIP netmask 255.255.255.255 broadcast $VIP up
     /sbin/route add -host $VIP dev ens33:0
     /sbin/ipvsadm -A -t $VIP:80 -s rr
     /sbin/ipvsadm -a -t $VIP:80 -r $RIP1:80 -g
     /sbin/ipvsadm -a -t $VIP:80 -r $RIP2:80 -g
     echo "ipvsadm starting --------------------[ok]"
     ;;
     stop)
     /sbin/ipvsadm -C
     systemctl stop ipvsadm
     ifconfig ens33:0 down
     route del $VIP
     echo "ipvsadm stoped---------------------[ok]"
     ;;
     status)
     if [ ! -e /var/lock/subsys/ipvsadm ];then
     echo "ipvsadm stoped---------------"
     exit 1
         else
         echo "ipvsamd Runing ---------[ok]"
     fi
     ;;
     *)
     echo "Usage: $0 {start|stop|status}"
   exit 1
     esac
     exit 0
  [root@localhost init.d]# service dr.sh start
ipvsadm starting --------------------[ok]
[root@localhost init.d]# systemctl status ipvsadm

配置第一台5web服务器

[root@localhost ~]# systemctl start httpd.service 
[root@localhost ~]# systemctl stop firewalld.service 
[root@localhost ~]# setenforce 0
[root@localhost ~]# cd /var/www/html/
[root@localhost html]# echo "this is accp web" > index.html
[root@localhost html]# cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]# cp ifcfg-lo ifcfg-lo:0
[root@localhost network-scripts]# vim ifcfg-lo:0
DEVICE=lo:0
IPADDR=192.168.100.10
NETMASK=255.255.255.0
ONBOOT=yes

[root@localhost network-scripts]# cd /etc/init.d/
[root@localhost init.d]# vim web.sh
#写一个脚本让它能响应调度服务器的控制,服务的启动和关闭
#!/bin/bash
VIP=192.168.100.10
     case "$1" in
     start)
         ifconfig lo:0 $VIP netmask 255.255.255.255 broadcast $VIP
         /sbin/route add -host $VIP dev lo:0
         echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
         echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
         echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
         echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
         sysctl -p >/dev/null 2>&1
         echo "RealServer Start OK "
         ;;
     stop)
         ifconfig lo:0 down
         route del $VIP /dev/null 2>&1
         echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
         echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
         echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
         echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
         echo "RealServer Stopd"
         ;;
     *)
         echo "Usage: $0 {start|stop}"
         exit 1
     esac
     exit 0

[root@localhost init.d]# chmod +x web.sh
[root@localhost init.d]# service web.sh start
RealServer Start OK 
[root@localhost init.d]# ifup lo:0 #开启虚拟网卡
[root@localhost network-scripts]# ifconfig
lo:0: flags=73  mtu 65536
     inet 192.168.100.10  netmask 255.255.255.0
     loop  txqueuelen 1  (Local Loopback)

[root@localhost network-scripts]# firefox "http://127.0.0.1/" & #用火狐浏览器去访问回访地址,放在后台运行
[2] 17973

搭建LVS的DR模式和配置keepalived+LVS

配置第二台7web服务器

[root@localhost ~]# systemctl start httpd

[root@localhost ~]# systemctl stop firewalld.service 
[root@localhost ~]# setenforce 0

[root@localhost ~]# cd /var/www/html/
[root@localhost html]# echo "this is kgv web" > index.html
[root@localhost html]# cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]# cp ifcfg-lo ifcfg-lo:0
[root@localhost network-scripts]# vim ifcfg-lo:0
DEVICE=lo:0
IPADDR=192.168.100.10
NETMASK=255.255.255.0
ONBOOT=yes
[root@localhost network-scripts]# cd /etc/init.d/
[root@localhost init.d]# vim web.sh

#!/bin/bash
VIP=192.168.100.10
     case "$1" in
     start)
         ifconfig lo:0 $VIP netmask 255.255.255.255 broadcast $VIP
         /sbin/route add -host $VIP dev lo:0
         echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
         echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
         echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
         echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
         sysctl -p >/dev/null 2>&1
         echo "RealServer Start OK "
         ;;
     stop)
         ifconfig lo:0 down
         route del $VIP /dev/null 2>&1
         echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
         echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
         echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
         echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
         echo "RealServer Stopd"
         ;;
     *)
         echo "Usage: $0 {start|stop}"
         exit 1
     esac
     exit 0
[root@localhost init.d]# chmod +x web.sh 
[root@localhost init.d]# ifup lo:0
[root@localhost init.d]# service web.sh start
RealServer Start OK 
[root@localhost init.d]# firefox "http://127.0.0.1/" &
[1] 17916

搭建LVS的DR模式和配置keepalived+LVS

去客户端去测试一下,先设置同一网段的地址

搭建LVS的DR模式和配置keepalived+LVS

去1主服务器测试能不能Ping通两个web服务器

[root@localhost init.d]# ping 192.168.100.221
PING 192.168.100.221 (192.168.100.221) 56(84) bytes of data.
64 bytes from 192.168.100.221: icmp_seq=1 ttl=64 time=0.416 ms
64 bytes from 192.168.100.221: icmp_seq=2 ttl=64 time=0.420 ms
[root@localhost init.d]# ping 192.168.100.222
PING 192.168.100.222 (192.168.100.222) 56(84) bytes of data.
64 bytes from 192.168.100.222: icmp_seq=1 ttl=64 time=0.348 ms
64 bytes from 192.168.100.222: icmp_seq=2 ttl=64 time=0.490 ms

再去客户端测试一下,我们的LVS没问题

(我们刷新一下就跳出第二个网页了)

搭建LVS的DR模式和配置keepalived+LVS
搭建LVS的DR模式和配置keepalived+LVS

去主服务器1配置keepalive

[root@localhost keepalived]# vim keepalived.conf

 10   smtp_server 127.0.0.1
 12   router_id LVS_01
22   virtual_router_id 10
 27     auth_pass abc123
30     192.168.100.10  #把原来的删掉我们只需要一个

36 virtual_server 192.168.100.10 80 {
 39   lb_kind DR
45     TCP_CHECK {

43   real_server 192.168.100.221 80 {
 44     weight 1
 45     TCP_CHECK {
 46       connect_port 80
 47       connect_timeout 3
 48       nb_get_retry 3
 49       delay_before_retry 3
 50     }  
 51   }     
 52   real_server 192.168.100.222 80 {
 53     weight 1
 54     TCP_CHECK {
 55       connect_port 80
 56       connect_timeout 3

[root@localhost keepalived]# systemctl start keepalived.service 
[root@localhost keepalived]# systemctl status keepalived.service #查看状态,如果没起来在开启一次
[root@localhost keepalived]# ip addr show dev ens33:0 #查看网卡有没有被启动起来
2: ens33:  mtu 1500 qdisc pfifo_fast state UP qlen 1000
   link/ether 00:0c:29:c9:dd:05 brd ff:ff:ff:ff:ff:ff
   inet 192.168.100.201/24 brd 192.168.100.255 scope global ens33
    valid_lft forever preferred_lft forever
   inet 192.168.100.10/24 brd 192.168.100.255 scope global secondary ens33:0
    valid_lft forever preferred_lft forever
   inet6 fe80::e3c7:14af:6e4d:7216/64 scope link 
    valid_lft forever preferred_lft forever

同样的配置第二台备份的4服务器

[root@localhost ~]# systemctl stop firewalld.service 
[root@localhost ~]# setenforce 0
[root@localhost ~]# vim /etc/sysctl.conf
net.ipv4.ip_forward=1
#proc响应关闭重定向功能
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0
[root@localhost ~]# sysctl -p #生效
net.ipv4.ip_forward = 1
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0

创建虚拟网卡

[root@localhost ~]# cd /etc/sysconfig/network-scripts/

[root@localhost network-scripts]# cp -p ifcfg-ens33 ifcfg-ens33:0
[root@localhost network-scripts]# vim ifcfg-ens33:0
100dd

DEVICE=ens33:0
ONBOOT=yes
IPADDR=192.168.100.10
NETMASK=255.255.255.0
[root@localhost network-scripts]# service network restart
Restarting network (via systemctl):             [  确定  ]

[root@localhost network-scripts]# ifup ens33:0 #开启网卡,这个网关是用来做虚拟IP的,相当于一给访问入口

[root@localhost network-scripts]# ifconfig
[root@localhost network-scripts]# cd /etc/init.d/
[root@localhost init.d]# vim dr.sh
#!/bin/bash
GW=192.168.100.1
VIP=192.168.100.10
RIP1=192.168.100.221
RIP2=192.168.100.222
case "$1" in
start)
     /sbin/ipvsadm --save > /etc/sysconfig/ipvsadm
     systemctl start ipvsadm
     /sbin/ifconfig ens33:0 $VIP broadcast $VIP netmask 255.255.255.255 broadcast $VIP up
     /sbin/route add -host $VIP dev ens33:0
     /sbin/ipvsadm -A -t $VIP:80 -s rr
     /sbin/ipvsadm -a -t $VIP:80 -r $RIP1:80 -g
     /sbin/ipvsadm -a -t $VIP:80 -r $RIP2:80 -g
     echo "ipvsadm starting --------------------[ok]"
     ;;
     stop)
     /sbin/ipvsadm -C
     systemctl stop ipvsadm
     ifconfig ens33:0 down
     route del $VIP
     echo "ipvsadm stoped---------------------[ok]"
     ;;
     status)
     if [ ! -e /var/lock/subsys/ipvsadm ];then
     echo "ipvsadm stoped---------------"
     exit 1
         else
         echo "ipvsamd Runing ---------[ok]"
     fi
     ;;
     *)
     echo "Usage: $0 {start|stop|status}"
   exit 1
     esac
     exit 0

[root@localhost init.d]# chmod +x dr.sh
[root@localhost init.d]# service dr.sh start
ipvsadm starting --------------------[ok]
[root@localhost init.d]# cd /etc/keepalived/
[root@localhost keepalived]# vim keepalived.conf 
 10   smtp_server 127.0.0.1
 12   router_id LVS_02
 20   state BACKUP
 22   virtual_router_id 10
 23   priority 99
27     auth_pass abc123
30     192.168.100.10

[root@localhost keepalived]# systemctl start keepalived.service 
[root@localhost keepalived]# systemctl status keepalived.service #查看状态,如果没起来在开启一次

我们把主服务器1关掉,去客户端去测试一下是不是还能Ping通

[root@localhost keepalived]# ifdown ens33:0

C:\Users\CHEN>ping 192.168.100.10

正在 Ping 192.168.100.10 具有 32 字节的数据: 来自 192.168.100.10 的回复: 字节=32 时间<1ms TTL=64 来自 192.168.100.10 的回复: 字节=32 时间<1ms TTL=64 来自 192.168.100.10 的回复: 字节=32 时间<1ms TTL=64 来自 192.168.100.10 的回复: 字节=32 时间<1ms TTL=6

以上就是搭建LVS的DR模式和配置keepalived+LVS的方法介绍,详细使用情况还得要大家自己使用过才能知道具体要领。如果想阅读更多相关内容的文章,欢迎关注创新互联行业资讯频道!

另外有需要云服务器可以了解下创新互联cdcxhl.cn,海内外云服务器15元起步,三天无理由+7*72小时售后在线,公司持有idc许可证,提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案,具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势,专为企业上云打造定制,能够满足用户丰富、多元化的应用场景需求。


新闻标题:搭建LVS的DR模式和配置keepalived+LVS-创新互联
本文来源:http://scyanting.com/article/ipici.html